Laminate Flooring Guide Floor Studio Decor Search
News image 2019.jpg

KRONOTEX Implements EU Construction Products Regulation

  • Kategorie: Industry news, Innovations, Products

01. July 2013 | New Rules Strengthen Free Intra-EU Trade from 1 July 2013

Despite a few unclear details, the new EU Regulation No. 305/2011 on Construction Products takes effect on 1 July 2013, taking the place of the Construction Products Directive (89/106/EEC). All construction products traded from 1 July 2013 must comply with the new rules. The complete text of the new regulation can be downloaded as a PDF. The new requirements also affect KRONOTEX laminate floors.

Goals of the New EU Construction Products Regulation

The older Construction Products Directive had to be enacted as national law in the EU member states. Its replacement has the legal form of a regulation and is therefore directly valid in all member countries. As a consequence, the CE marking is now applied according to uniform Europe-wide criteria and there are no longer any national differences in its interpretation and application.
The older directive was intended to eliminate technical barriers to trade and strengthen the free movement of goods within the internal European market. The new regulation shares these intentions while closing gaps and making the rules simpler and more precise.

What is new?

A few terms have changed:

New terms under the regulation Old terms under the directive
Basic requirements for construction works Essential requirements in respect of construction works
Essential characteristics (of a construction product in respect of the basic requirements) -
Performance of a construction product Declared properties
Declaration of performance (by the manufacturer) Declaration of conformity (by the manufacturer)
Assessment and verification of constancy of performance
Attestation of conformity
European Assessment Document
New: replaced by the CUAP procedure and ETAG
Announced as Harmonised Specification
-
Previously: ETAG (approval guideline) or CUAP procedure
European Technical Assessment European Technical Approval (ETA)
Technical Assessment Body Approval body
Specific Technical Documentation -

Basic Requirements for Construction Works Supplemented

The “essential requirements” have been revised and supplemented and from 1 July 2013 have binding validity as the “basic requirements for construction works”. They constitute the basis for developing harmonised technical specifications for then defining the essential requirements for specific products and applications.

Conformity Declaration Now a Declaration of Performance

The name says it all: the “declaration of performance” reveals a product’s performance in respect of its essential requirements. Which properties are essential for a given construction product is governed by the Harmonised Technical Specification. The basis for the declaration of performance is the manufacturer’s technical documentation.

In the declaration of performance, the manufacturer must provide the following information:

0. Reference number
1. Unique identification code of the product type
2. Type, batch or serial number or any other element allowing identification of the construction product
3. Intended use or uses of the construction product in accordance with the applicable harmonised technical specification
4. Name, registered trade name or trade mark and contact address of the manufacturer
5. Where applicable, name and contact address of the authorised representative
6. System or systems for assessing and verifying the constancy of performance of the construction product
7. If the construction product is covered by a harmonised standard:

  • Description of third-party tasks
  • Reference to issued certificates of constancy of performance or conformity as established by factory production control
  • Test/calculation reports, as far as relevant
  • Name and identification number of notified body

8. If a European Technical Assessment has been issued for the construction product:

  • Description of third-party tasks
  • Reference to issued certificates of constancy of performance or conformity as established by factory production control
  • Test/calculation reports, as far as relevant
  • Name and number of notified body
  • Number of European Assessment Document
  • Number of the European Technical Assessment

9. List of essential properties for the declared purpose of use, performance of the construction product for the indicated essential properties and corresponding harmonised technical specifications
10. Place, date of issue and name, function and signature of the individual who has issued the declaration of performance on behalf of the manufacturer

Together with the CE marking, the manufacturer certifies that the product corresponds to the essential properties and declared performance.

KRONOTEX has prepared declarations of performance for its laminate floors in accordance with the new rules. The documents for the laminate floors are available in the download section under DoP acc. to CPR (declarations of performance under the Construction Products Regulation).

Mandatory CE Marking

The CE marking is based on the declaration of performance and is mandatory for all construction products with a declaration of performance. The manufacturer accepts responsibility for ensuring that the data in the declaration of performance actually apply to the corresponding construction product.

Five Latest Articles

27.03.2019 SWISS KRONO in China at DOMOTEX asia
05.07.2018 Grow-to-Measure Joints
12.06.2018 Please Touch! The Attraction of Tactile Products
05.04.2018 Online Quantity Calculator: How much laminate flooring do you need?
01.02.2018 New Floors for the New Year: the 2018 KRONOTEX Collections
More articles
­

Cookies facilitate the provision of our services. By using our services, you agree that we use cookies. For more information on privacy, please visit the following link Data protection statement